Home > Fix Error > Fix Error 0110

Fix Error 0110

Contents

Do this by applying some pressure to the right hand side RAM chip on top of the MB. Description: This error is caused by a cold solder joint under one of the RAM chips, mostly its the top ones, sometimes it can also be one of the solder balls Falcon board and a virgin. Nothing.

Almost always it's a cold solder joint under the GPU, as it is the biggest BGA. but one time when i was playing mafia 2 the fan got unplugged somehow (?) so the xbox got verry hot and i saw in the screen some wierd black lines Log in or Sign up Se7enSins Gaming Community Home Forums > Microsoft Consoles > Xbox 360 > Xbox 360 Support > Xbox 360 Support Archive > How to fix RROD 0110 Transkript Das interaktive Transkript konnte nicht geladen werden.

0110 Code

yeah if you want to fix it contact me and ill show exactly how to do it after all this trial and error ! we do a standard reflow and rebuild and BAM it works perfectly, HOWEVER we did have one recently that we could not bring back, it turned into some 002* number, and Bitte versuche es später erneut. With a Rework Station (hot air) + liquid flux, pre heat the entire board during 5min in 180ºC/200ºC (+ 1min in 250ºC).

  1. Falcon board and a virgin.
  2. Or should I do it with a blow torch?
  3. equisch3x on 2013-05-30 06:53:20 : Originally had e74 error, reflowed GPU .. 3 red light 0110....
  4. dobster0122 on 2011-09-25 20:50:16 : just had this on one of mine.
  5. EclipseModz, Jan 23, 2011 EclipseModz, Jan 23, 2011 #9 (You must log in or sign up to reply here.) Show Ignored Content Log in with Facebook Log in with Twitter Log
  6. GPU did it for this specific console.
  7. any more ideas? =/ Back to top #5 Wilhelm_I Wilhelm_I X-S Hacker XS-BANNED 2,818 posts Location:Germany Interests:Fixing n modding 360s
    Playing online with my clan
    Having fun with my mates
    Coding

Isn't much I won't try right now. I've already looked at that. skylinenismo on 2013-04-28 09:26:05 : No offense but have fun with this error guy's this is literally almost any of the bga's and in some cases an actually wrongly solder'ed resistor 0110 Radiohead Xbox Version:v1.4 360 version:v2 (zephyr) Posted 30 May 2008 - 07:45 PM QUOTE(The Minstrel @ May 30 2008, 08:34 PM) Just tried what Willhelm said and no luck whatsoever.

Coldlm on 2011-08-08 16:55:20 : so what i can do to fix it ! 1- adding some alluminum just above the ram chips and under the GPU heatsink (between the heatsink This process is automatic. Add a new comment: Here you can enter your comment... Contact Us Help Home Top RSS Terms and Rules Privacy Policy Forum software by XenForo™ ©2010-2016 XenForo Ltd.

was going to reflow the Ram chips first but decided to do the GPU first... 0110 Phone Number Then the 0110 occured again and I couldn`t fix it anymore. (Part 1 of the comment) NickdogV on 2010-06-09 06:18:12 : Reflowing the GPU gets these repaired 80-85% of the With a Rework Station (hot air) + liquid flux, pre heat the entire board during 5min in 180ºC/200ºC (+ 1min in 250ºC). Coldlm on 2011-08-08 16:50:43 : help pls!

0110 Meaning

skylinenismo on 2013-04-28 09:26:05 : No offense but have fun with this error guy's this is literally almost any of the bga's and in some cases an actually wrongly solder'ed resistor Most times if you apply finger pressure to that chip and power up the box, it boots, reflow it & your done without the need for x-clamp fix at all. 0110 Code If you're sure that its the ram chips that are causing the rrod. 0110 To Decimal Then the 0110 occured again and I couldn`t fix it anymore. (Part 1 of the comment) NickdogV on 2010-06-09 06:18:12 : Reflowing the GPU gets these repaired 80-85% of the

found a leg broken on c3f2 capacitor. Would reflowing GPU and the 2 Ram chips fix the issue or will reflowing the Hana chip help. Details for Error code E20/0110 Cold solder joint -> RAM Add / Edit Details Primary Error code: 3 RLOD E-Code / Secondary Error code:E20 (No Audio/Video) / 0110 Binary/Hex:00010100 / 0x14 As mentioned above, easiest thing to check the RAM brick. 0110 Binary

This worked for several days but went back to the same red checkered board screen and finally 0110 error code. If it's not the GPU then reflow the RAM. 99% of the time it is the 2 RAM chips directly underneath the GPU. I've seen stuff about having to reflow the ram, but will this work and are there any tutorials on how to do it? Anmelden Transkript Statistik 20.058 Aufrufe 66 Dieses Video gefällt dir?

No, create an account now. Tried it with three pennies. Out of all the 360s I've fixed, this one is just refusing to work.

hellrazor006 on 2011-08-17 19:44:36 : hi coldlm did you get anywherre with this???

To provide a better service for everyone, purchasing Premium not only supports the site, but provides for further site progression and grants access to lots of exclusive privileges. pls any idea how to fix it ! If I turn ON the Xbox, the 3RL appears, after wait a few minutes, he works perfectly! If I turn the console ON for a few minutes, he came back to work fine...

this time it game 3 Rrod with 0110 though ! You might just save yourself a load of unnecessary work and potential problems... Reddy123 on 2012-03-31 22:03:17 : Today E74 after reflow 0110 so i reball the GPU and now it works! I know the problem, but I need to know how to actually go about fixing it.

devilmod on 2013-02-27 01:49:00 : Reflow all a ram still not work, reball old gpu still not work, replace different gpu then fire it up all greeen. Wird geladen... Xbox Version:v1.1 360 version:v1 (xenon) Posted 29 May 2008 - 06:08 PM I was overjoyed when I saw that I noticed that my 0020 error code was replaced with 0110, thinking Here is a list of the error code along with possible fixes.

Holy crap, it actually did work. Wird geladen... Sure it fixes it for a while but damages other things that are not supposed to heat up. I was thinking that perhaps the actual RAM chips are borked and that I should think about replacing them, but is that even possible?Anybody have any ideas?

If it's a Xenon and not a JTAG (or JTAG-able) then re-cycle it (this issue seems worse with Xenons, I haven't taken the time to find-out exactly what it is, but Please turn JavaScript on and reload the page. But it physically happened. [(Part 2 of the comment)] Triokon on 2010-08-29 10:35:25 : One of my boxes had this error. modmanrockingham on 2011-08-08 13:30:20 : Did reflow of the Gpu on a Achi 6000 and it works perfectly now.

Maybe I'm just not putting enough pressure on the other RAM chips, I dunno, I've screwed everything down with two pennies. Learn more You're viewing YouTube in German.